The DSPIC30F4013-30I/P is a motor control 16-bit Digital Signal Controller with seamless migration options from this device to DSPIC33F and PIC24 devices in similar packages. Enhanced flash program memory, 10,000 erase/write cycle (minimum) for industrial temperature range, 100k (typical). Data EEPROM memory, 100,000 erase/write cycle (minimum) for industrial temperature range, 1M (typical). Data converter interface (DCI) supports common audio codec protocols, including I²S and AC’97. The CMOS technology features a low power consumption, high speed flash technology and wide operating voltage range (2.5 to 5.5V).
- Modified Harvard architecture
- C compiler optimized instruction set architecture
- 84 base instructions with flexible addressing modes
- Modulo and bit-reversed addressing modes
- Two, 40-bit wide accumulators with optional saturation logic
- 17-bit x 17-bit single cycle hardware fractional/integer multiplier
- Single cycle multiply-accumulate (MAC) operation
- 40-stage barrel shifter
- Dual data fetch
- High current sink/source I/O pins (25mA/25mA)
- Optionally pair up 16-bit timers into 32-bit timer modules
- 3-wire SPI™ modules (supports 4 frame modes)
- Addressable UART modules with FIFO buffers and selectable pins
- 12-bit 200Ksps analogue-to-digital converter (A/D)
- A/D conversion available during sleep and idle
- 1 sample/hold
- Multiple conversion sequencing options
- Self-reprogrammable under software control
- Fail-safe clock monitor operation
- Detects clock failure and switches to on-chip low power RC oscillator
%20for%20industrial%20temperature%20range,%20100k%20(typical).%20Data%20EEPROM%20memory,%20100,000%20erase/write%20cycle%20(minimum)%20for%20industrial%20temperature%20range,%201M%20(typical).%20Data%20converter%20interface%20%5B…%5D&media=https://powerlab.dz/wp-content/uploads/2023/03/images-2023-03-06T214303.875-1.jpg){kind=link}