DESCRIPTION :
VERY COMPACT : 3/64 DIN – 24 X 72 mm.
LUMINOUS : 14 mm LED for easy reading.
EASY : Quick installation without tools.
– Disconnect screw terminal blocks.
CONFIGURABLE : By button in front panel,
– DC / AC / AUTO on voltmeter & ammeter.
PRACTICAL : Direct Power supply +5 V or 7,5 V to 12 V.
– Optional power supply until 264 VAC isolated*.
PROTECTION : Front : IP55 and case : IP31.
GENERAL :
General
• Readout : 31/2 digits 14 mm red LED displays.
• Accuracy : ± 0,1%, + 1 digit on DC mode.
± 0,25%, + 1 digit on RMS mode.
• Frequency measurement limit (RMS mode) : 40 to 750 Hz.
• Power supply : + 5 Volts, ± 5% regulated,
or + 7,5 to 12 Volts rectified and filtered.
• Current consumption : 160 mA.
• Temperature drift : 0,011% / °C.
• Display’s cadency : 1,3 per second on DC mode.
0,5 to 1,5 per second RMS on AC mode.
• Red antireflection filter.
• The measurement input (e-) and power supply-grounds are common
except in case of the use of one of the optional power supplies.
• Configuration : By button in front of panel
– DC, AC, AUTO mode and decimal point on voltmeter & ammeter
• Presentation : Display of the AC tension presence.
Two clips on its sides that allow a fast assembly without tools
on any surface with a thickness included between 0,8 and 5 mm.
Front : IP55 and case : IP31.
• Cut-out dimensions : 22,2 x 68 mm minimum and 22,5 x 68,8 mm maximum.
The face of the case respects the DIN norms : 24 x 72 mm,
depth : 49 mm and 96 mm with optional accessories.
• Connection : plug-in connector to wire up 2.5mm²
• Optional accessories :
Power supplies
*AL48250 : High tension (galvanic insulation 4 KV)
Input : from 40 to 264 V AC or
from 40 to 370 V DC
*AL1040 : Low tension (galvanic insulation 4 KV)
Input : from 9 to 28 V AC or
from 8 to 40 V DC
Shunt
*SH10020 : 20 A ; 100 mV shunt, 0,5 class, DIN rail mounting
