Specifications
Distinctive Features:
- Momentary (NO)
- Impact resistance IK08 for model Ø 19 mm (.748)
- and IK10 for model Ø 22 mm (.866)
- Stainless steel actuator and bushing
- UL-CSA approved (long case only)
General Specifications:
- Torque : 1.5 Nm min.- 4 Nm max. applied to nut
- Panel thickness : 1 (.039) to 11 mm (.433) max.
- Low level or mechanical life : 1,000,000 cycles
- Hand soldering : 300 °C, 3 sec. max.
- Panel cut-out : Ø 19.2 mm (.755) or Ø 22.2 mm (.874)
- Min. pitch for matrix mounting : 30 mm x 30 mm (1.181×1.181)
Environmental Specifications:
- Operating temperature : -30 °C to +70 °C
Electrical Specifications:
- Max. current/voltage rating with resistive load : – A contacts : 4 A 12 VDC, 500,000 cycles – C contacts : 2 A 48 VDC, 10,000 cycles
- Initial contact resistance : 50 mΩ max.
- Insulation resistance : 1,000 MΩ min. at 500 VDC
- Dielectric strength : 2,000 Vrms 50 Hz min. between terminals and frame 2,000 Vrms 50 Hz min. between terminals
Materials:
- Case : PBT
- Contacts : brass, silver plated (C)
- Bushing and actuator : see next page
%20Impact%20resistance%20IK08%20for%20model%20Ø%2019%20mm%20(.748)%20and%20IK10%20for%20model%20Ø%2022%20mm%20(.866)%20Stainless%20steel%20actuator%20and%20bushing%20UL-CSA%20approved%20(long%20case%20only)%20General%20Specifications:%20Torque%20:%201.5%20Nm%20min.-%204%20Nm%20max.%20applied%20to%20nut%20Panel%20thickness%20:%201%20(.039)%20to%2011%20mm%20(.433)%20max.%20%5B…%5D&media=https://powerlab.dz/wp-content/uploads/2023/04/images-25.jpg){kind=link}